Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Japanese

Translating step 32

Step 32
Insert a plastic opening tool in the rectangular gap in the upper area of the logic board, and pry the logic board up from the rear case. While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive. While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.
  • Insert a plastic opening tool in the rectangular gap in the upper area of the logic board, and pry the logic board up from the rear case.

  • While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.

プラスチック製開封ツールをロジックボード上部の長方形をした隙間に差し込みます。背面ケースからロジックボードを上方にこじ開けます。

開封ツールをロジックボードの底に差し込んだまま、ロジックボードの上部端を接着剤から取り除くため隙間の始まる先端から終わりまでスライドします。

Your contributions are licensed under the open source Creative Commons license.