Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Italian

Translating step 32

Step 32
Insert a plastic opening tool in the rectangular gap in the upper area of the logic board, and pry the logic board up from the rear case. While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive. While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.
  • Insert a plastic opening tool in the rectangular gap in the upper area of the logic board, and pry the logic board up from the rear case.

  • While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.

Inserisci uno strumento di apertura di plastica nell'incavo rettangolare sopra la scheda logica e fai leva per sollevare la scheda logica dal case posteriore.

Mentre mantieni lo strumento di apertura sotto la scheda logica, fallo scorrere per ltutta la lunghezza dell'incavo per staccare la parte superiore della scheda logica dall'adesivo.

Your contributions are licensed under the open source Creative Commons license.