Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
German

Translating step 27

Step 27
The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself. Insert an opening pick under the Lightning cable where it meets the logic board. Slide the pick down and around the bend in the cable.
  • The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.

  • Insert an opening pick under the Lightning cable where it meets the logic board.

  • Slide the pick down and around the bend in the cable.

Das Kabel zum Lightning Port ist mit etwas Kleber am Gehäuse festgeklebt. Um es abzulösen, musst du ein Plektrum zwischen Kabel und Gehäuse entlangschieben. Sei sehr vorsichtig und zerschneide nicht das Lightning Kabel selbst.

Setze ein Plektrum an der Stelle an, wo das Lightning Kabel auf das Logic Board trifft.

Schiebe das Plektrum weiter entlang und um die Biegung des Kabels.

Your contributions are licensed under the open source Creative Commons license.