Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Back to Guide
English
German
Previous step Next step

Translating step 23

Step 23
Place a heated iOpener over the rear-facing camera end of the iPad, and let it sit for at least a minute to soften the adhesive through the rear case.

  • Place a heated iOpener over the rear-facing camera end of the iPad, and let it sit for at least a minute to soften the adhesive through the rear case.

  • More time won't hurt, but you may need to reheat your iOpener and reapply it if you leave it on the rear case for too long.

Lege einen erwärmten iOpener auf den Rand mit der Rückkamera des iPad. Lasse ihn dort mindestens eine Minute liegen, um durch das Gehäuse hindurch den Klebstoff aufzuweichen.

Längere Zeit schadet nicht, aber du musst zwischendurch den iOpener dann immer wieder aufwärmen.

Your contributions are licensed under the open source Creative Commons license.