Fix Your Stuff Community Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Back to Guide
English
German
Previous step Next step

Translating step 21

Step 21
Remove the two 3.3 mm Phillips #000 screws securing the Lightning port.

  • Remove the two 3.3 mm Phillips #000 screws securing the Lightning port.

  • To find these screws, hold the iPad vertically and look down at the Lightning port.

Entferne die beiden 3,3 mm Kreuzschlitzschrauben #000, die den Lightning Port befestigen.

Du findest diese Schrauben, wenn du das iPad senkrecht hältst und nach unten zum Lightning Port schaust.

Your contributions are licensed under the open source Creative Commons license.