Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Back to Guide
English
German
Previous step Next step

Translating step 17

Step 17
Use the flat end of a spudger to disconnect the microphone cable connector from the logic board. Pry up only on the connector—not on the socket itself.

  • Use the flat end of a spudger to disconnect the microphone cable connector from the logic board.

  • Pry up only on the connector—not on the socket itself.

Löse den Verbinder des Mikrofonkabels mit dem flachen Ende des Spudgers vom Logic Board.

Heble nur am Verbinder - nicht am Sockel selbst!

Your contributions are licensed under the open source Creative Commons license.