Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Chinese

Translating step 16

Step 16
Use the flat end of a spudger to disconnect the headphone jack connector from the logic board. Pry up only on the connector—not on the socket itself. Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.
  • Use the flat end of a spudger to disconnect the headphone jack connector from the logic board.

  • Pry up only on the connector—not on the socket itself.

  • Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.

  • Fold the headphone jack cable out of the way.

用撬棒的平端将耳机插孔连接器从电路板上断开。

只撬开连接器,不在插座上。

新版的 iPad 设备有一圈胶带连接电路板上的插座。必须断开该胶带才能断开耳机插孔。

将耳机插孔电缆翻折起来。

Your contributions are licensed under the open source Creative Commons license.