Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Spanish

Translating step 16

Step 16
Use the flat end of a spudger to disconnect the headphone jack connector from the logic board. Pry up only on the connector—not on the socket itself. Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.
  • Use the flat end of a spudger to disconnect the headphone jack connector from the logic board.

  • Pry up only on the connector—not on the socket itself.

  • Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.

  • Fold the headphone jack cable out of the way.

Usa el extremo plano de un spudger para desconectar el conector jack de auriculares de la placa lógica.

Haz palanca solo en el conector, no en el zócalo.

Las nuevas unidades de iPad tienen un bucle de cinta que conecta este conector a su zócalo en la placa lógica. Esta cinta debe cortarse para desconectar la toma de auriculares.

Dobla el cable de la toma de auriculares fuera del camino.

Your contributions are licensed under the open source Creative Commons license.