Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
German

Translating step 16

Step 16
Use the flat end of a spudger to disconnect the headphone jack connector from the logic board. Pry up only on the connector—not on the socket itself. Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.
  • Use the flat end of a spudger to disconnect the headphone jack connector from the logic board.

  • Pry up only on the connector—not on the socket itself.

  • Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.

  • Fold the headphone jack cable out of the way.

Löse den Verbinder der Kopfhörerbuchse mit dem flachen Ende des Spudgers vom Logic Board.

Heble nur am Verbinder - nicht am Sockel selbst!

Bei neueren iPads ist der Verbinder noch mit etwas Klebeband festgeklebt. Das Klebeband muss dann aufgeschnitten werden.

Biege das Kabel der Kopfhörerbuchse aus dem Weg.

Your contributions are licensed under the open source Creative Commons license.