Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Italian

Translating step 14

Step 14
Use the flat end of a spudger to disconnect the front-facing camera connector from the  logic board. Pry up only on the connector—not on the socket itself. Fold the front-facing camera cable out of the way.
  • Use the flat end of a spudger to disconnect the front-facing camera connector from the logic board.

  • Pry up only on the connector—not on the socket itself.

  • Fold the front-facing camera cable out of the way.

  • There is a bit of conductive adhesive between the gold-colored cable contacts. Be sure to apply pressure to readhere these contacts during reassembly.

Usa la punta piatta di uno spudger per disconnettere il connettore frontale della fotocamera dalla scheda logica.

Fai leva solo sul connettore, non sul suo zoccolo.

Piega il cavo frontale della fotocamera verso l'esterno in modo che non intralci.

C'è un po' di adesivo conduttore tra i contatti dorati del cavo. Assicurati di premere questi contatti per riattaccarli bene durante il rimontaggio.

Your contributions are licensed under the open source Creative Commons license.