Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
German

Translating step 1

Step 1
Use the flat end of a spudger to disconnect the front-facing camera connector from the  logic board. Only pry up on the connector—not on the socket itself. Fold the front-facing camera cable out of the way.
  • Use the flat end of a spudger to disconnect the front-facing camera connector from the logic board.

  • Only pry up on the connector—not on the socket itself.

  • Fold the front-facing camera cable out of the way.

Löse den Verbinder der Frontkamera mit dem flachen Ende des Spudgers vom Logic Board.

Hebele nur am Verbinder, nicht am Sockel selbst.

Biege das Kamerakabel aus dem Weg.

Your contributions are licensed under the open source Creative Commons license.