Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Spanish

Reemplazo del conjunto del panel frontal del iPad Air Wi-Fi

Guide Prerequisites

All prerequisite guides must be translated before this translation is considered complete.

Calentamiento de iOpener

Reemplazo del panel frontal del iPad Air Wi-Fi

Reemplazo del LCD del iPad Air Wi-Fi

Guide Information

= Done = Incomplete
    Use this guide to replace the front glass and digitizer assembly on an iPad Air. [ … ] '''Warning: the battery isolation method in this guide is outdated, and may result in irreversible damage to the battery pins of the logic board, effectively destroying it. If'''Be very careful when you choose to isolate the battery this way, heed all warnings and work extremely carefully.using a battery blocker.''' The battery contacts are easily damaged, resulting in irreversible damage. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.'''components.
    Use this guide to replace the front glass and digitizer assembly on an iPad Air. [ … ] '''Warning: the battery isolation method in this guide is outdated, and may result in irreversible damage to the battery pins of the logic board, effectively destroying it. If'''Be very careful when you choose to isolate the battery this way, heed all warnings and work extremely carefully.using a battery blocker.''' The battery contacts are easily damaged, resulting in irreversible damage. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.'''components.

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief summary will only appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1

      Quita cualquier cinta que cubra el conector del cable plano del botón de inicio.

      Step 2

      Usa el extremo plano de un spudger para voltear la pestaña del conector ZIF del cable plano del botón de inicio hacia arriba.

      Step 3

      Usa el extremo plano de un spudger o una uña para sacar con cuidado los dos conectores del cable del digitalizador directamente desde sus enchufes.

      Step 4

      Quita con cuidado el cable plano del botón de inicio del adhesivo que lo sujeta a la carcasa trasera.

      Step 5

      Quita el conjunto del panel frontal.

      Your contributions are licensed under the open source Creative Commons license.