Fix Your Stuff

Right to Repair

Store

English
Spanish

Reemplazo del LCD del iPad Air Wi-Fi

Guide Prerequisites

All prerequisite guides must be translated before this translation is considered complete.

Calentamiento de iOpener

Reemplazo del panel frontal del iPad Air Wi-Fi

Guide Information

= Done = Incomplete
    Replace a damaged or nonfunctioning LCD in an iPad Air. [ … ] '''Warning:'''Be very careful when you isolate the battery isolation method in this guide is outdated, and may result using a battery blocker.''' The battery contacts are easily damaged, resulting in irreversible damage to the battery pins of the logic board, effectively destroying it. If you choose to isolate the battery this way, heed all warnings and work extremely carefully. board. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.''' components.
    Replace a damaged or nonfunctioning LCD in an iPad Air. [ … ] '''Warning:'''Be very careful when you isolate the battery isolation method in this guide is outdated, and may result using a battery blocker.''' The battery contacts are easily damaged, resulting in irreversible damage to the battery pins of the logic board, effectively destroying it. If you choose to isolate the battery this way, heed all warnings and work extremely carefully. board. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.''' components.

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief summary will only appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1

      Quita cualquier cinta que oscurezca los tornillos de la pantalla LCD.

      Step 2

      Quita los siguientes tornillos Phillips que sujetan la pantalla LCD.

      Step 3

      No intentes quitar completamente la pantalla LCD. Todavía está conectado al iPad por varios cables en el extremo del botón de inicio. Levanta solo desde el extremo frontal de la cámara.

      Step 4

      Quita el único tornillo Phillips de 2.3 mm que fija el conector de la batería a la placa lógica.

      Step 5

      Quita los tres tornillos Phillips de 1.4 mm del soporte del cable de la pantalla.

      Step 6

      Usa el extremo plano de un spudger para levantar suavemente el soporte del cable de la pantalla directamente desde la placa lógica.

      Step 7

      Quita la pantalla LCD.

      Your contributions are licensed under the open source Creative Commons license.