Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 28 guides that include this step.

English
Chinese

Translating step 6

Step 6
Use the flat end of a spudger to gently pry the display cable bracket straight up from the logic board. The display cable connector is adhered to the underside of the bracket, so don’t push the spudger too far under the bracket, or you may damage the connector.
  • Use the flat end of a spudger to gently pry the display cable bracket straight up from the logic board.

  • The display cable connector is adhered to the underside of the bracket, so don’t push the spudger too far under the bracket, or you may damage the connector.

使用撬棒扁平一段来将支架从逻辑板上撬起。

显示屏的排线就在支架下方,因此请勿将撬棒深入过深,这样可能会损坏排线。

Your contributions are licensed under the open source Creative Commons license.