Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 28 guides that include this step.

English
German

Translating step 6

Step 6
Use the flat end of a spudger to gently pry the display cable bracket straight up from the logic board. The display cable connector is adhered to the underside of the bracket, so don’t push the spudger too far under the bracket, or you may damage the connector.
  • Use the flat end of a spudger to gently pry the display cable bracket straight up from the logic board.

  • The display cable connector is adhered to the underside of the bracket, so don’t push the spudger too far under the bracket, or you may damage the connector.

Mit dem flachen Ende eines Spudgers kannst du ganz vorsichtig die Halterung des Displaykabels senkrecht aus der Hauptplatine heben.

Der Verbinder des Displaykabels ist auf der Unterseite der Halterung angebracht. Schiebe deswegen den Spudger nicht zu weit unter die Halterung, du könntest den Verbinder beschädigen.

Your contributions are licensed under the open source Creative Commons license.