Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 28 guides that include this step.

English
Italian

Translating step 4

Step 4
Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board. To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery. The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
  • Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

  • The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.

  • Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

Rimuovi la vite con testa a croce da 2,3 mm che fissa il connettore della batteria sulla scheda logica.

Per ridurre il rischio di cortocircuito, puoi inserire un battery blocker o un plettro modificato per disconnettere la batteria.

Il plettro o il battery blocker sono modi obsoleti per isolare la batteria, in quanto si rischia di danneggiare i pin della batteria sotto la scheda logica. Se usi questo metodo, fai estrema attenzione a inserire l'attrezzo delicatamente e dritto in direzione della scheda logica. Non torcere o far oscillare il plettro da un lato all'altro.

Fai scorrere il battery blocker sotto l'area del connettore della batteria della scheda logica e lascialo in posizione mentre lavori.

Your contributions are licensed under the open source Creative Commons license.