Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 28 guides that include this step.

English
French

Translating step 4

Step 4
Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board. To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery. Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.
  • Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

  • Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

Retirez la seule vis cruciforme #000 de 2,3 mm fixant le connecteur de la batterie à la carte mère.

Pour réduire le risque d'un court-circuit, vous pouvez utiliser un médiator d'isolation de batterie pour débrancher la batterie.

Faites glisser un médiator d'isolation de batterie en dessous de la zone de connecteur de la batterie de la carte mère et laissez-la en place pendant votre travail.

[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can useinsert a battery isolation[product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
[* black] Slide athe battery isolation pickblocker underneath the battery connector area of the logic board, and leave it in place while you work.
[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can useinsert a battery isolation[product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
[* black] Slide athe battery isolation pickblocker underneath the battery connector area of the logic board, and leave it in place while you work.

Your contributions are licensed under the open source Creative Commons license.