Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 71 guides that include this step.

English
Spanish

Translating step 28

Step 28
Once all of the adhesive has been separated, open the front glass like a page in a book and rest it on your workspace. During reassembly, clean the remains of the adhesive from the case (and the front glass if you are re-using it) with isopropyl alcohol, and replace the adhesive using our display adhesive application guide and pre-cut adhesive strips.
  • Once all of the adhesive has been separated, open the front glass like a page in a book and rest it on your workspace.

  • During reassembly, clean the remains of the adhesive from the case (and the front glass if you are re-using it) with isopropyl alcohol, and replace the adhesive using our display adhesive application guide and pre-cut adhesive strips.

  • It's easy to pinch a flex cable between the front glass and the iPad's frame during reassembly. Be mindful of the flex cables and make sure they gently fold and tuck under the frame. If the folds in a flex cable are pressed completely flat, it may be damaged beyond repair.

Una vez que se haya separado todo el adhesivo, abre el cristal frontal como una página en un libro y déjalo en tu espacio de trabajo.

Durante el reensamblaje, limpia los restos del adhesivo de la carcasa (y el vidrio frontal si lo estás reutilizando) con alcohol isopropílico, y reemplaza el adhesivo usando nuestra guía de aplicación de adhesivon ytiras adhesivas precortadas.

Es fácil pellizcar un cable flexible entre el cristal frontal y el marco del iPad durante el reensamblaje. Estáte atento a los cables flexibles y asegúrate de que se pliegan suavemente y se pliegan debajo del marco. Si los pliegues de un cable flexible se presionan por completo, puede dañarse sin posibilidad de reparación.

Your contributions are licensed under the open source Creative Commons license.