Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 52 guides that include this step.

English
German

Translating step 5

Step 5
Place an opening pick in the gap opened by the suction cup. Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD. Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.
  • Place an opening pick in the gap opened by the suction cup.

  • Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.

  • Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

Platziere den Opening Pick in dem entstandenen Spalt.

Schiebe den Pick nicht tiefer in das iPad als den lackierten Rand. Andernfalls kannst du das LCD beschädigen.

Löse nun den Saugnapf vom Touch Screen.

Your contributions are licensed under the open source Creative Commons license.