Skip to main content
English
Dutch

Translating step 20

Step 20
Bend up the second lead and begin to heat it. When sufficiently hot, apply solder to secure the joint. Tin the tip of the iron, then return it to its stand.
Continue soldering the LED in place.
  • Bend up the second lead and begin to heat it.

  • When sufficiently hot, apply solder to secure the joint.

  • Tin the tip of the iron, then return it to its stand.

  • Cut the lead off when you're finished.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.