Skip to main content
English
Japanese

Translating step 21

Step 21
Repeat the steps taken previously. Position the LED and bend one lead down to hold it in place. Solder the other lead in place, then clip off the excess.
Solder the second LED
  • Repeat the steps taken previously.

  • Position the LED and bend one lead down to hold it in place.

  • Solder the other lead in place, then clip off the excess.

  • Bend the first lead back up, then solder in it place as well. Clip the lead when complete.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.