Skip to main content
English
Chinese

Translating step 16

Step 16
Continue heating the junction by positioning the iron as previously instructed. The material in this junction is sufficiently greater in mass than the battery holder, thus it will require more heat to raise it to the correct temperature. Leave the iron in place a little longer than previously, and check how well solder flows when you begin. Feed solder into the junction.
Solder the pin
  • Continue heating the junction by positioning the iron as previously instructed.

  • The material in this junction is sufficiently greater in mass than the battery holder, thus it will require more heat to raise it to the correct temperature. Leave the iron in place a little longer than previously, and check how well solder flows when you begin.

  • Feed solder into the junction.

  • Check for a cold solder joint. Reflow if necessary.

  • Tin the tip of the iron and return the iron to its stand.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.