Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

English
Chinese

Translating step 2

Step 2
Peel back the tape covering the top of the keyboard ribbon cable connector. Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket. Be sure you are prying up on the hinged retaining flap, not the socket itself.
  • Peel back the tape covering the top of the keyboard ribbon cable connector.

  • Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Use the flat end of a spudger to push the keyboard ribbon cable out of its socket.

剥开覆盖键盘带状电缆连接器顶部的胶带。

使用挑线器的扁平端将键盘带状电缆ZIF插座上的固定挡板翻起来。

确保你在铰链固定盖上撬动,而不是插座本身。

使用挑线器的扁平端将键盘带状电缆从插座中推出。

Your contributions are licensed under the open source Creative Commons license.