Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

English
French

Translating step 2

Step 2
Peel back the tape covering the top of the keyboard ribbon cable connector. Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket. Be sure you are prying up on the hinged retaining flap, not the socket itself.
  • Peel back the tape covering the top of the keyboard ribbon cable connector.

  • Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Use the flat end of a spudger to push the keyboard ribbon cable out of its socket.

Décollez la bande couvrant le connecteur de la nappe du clavier.

Utilisez l'extrémité plate d'une spatule (spudger) pour défaire le clapet de retenue sur la prise ZIF de la nappe du clavier.

Veillez à faire levier uniquement sur le clapet de retenue et non pas sur la prise elle-même.

Utilisez l'extrémité plate d'une spatule (spudger) pour pousser la nappe du clavier en dehors de la prise.

Your contributions are licensed under the open source Creative Commons license.