Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
Spanish

Translating step 2

Step 2
Gently detach the touchpad ribbon connected to the motherboard using the blunt forceps. The touchpad ribbon is connected to the motherboard by a connector that flips to tighten and loosen. During reassembly, to reattach the ribbon, the plastic tray will need to be gently removed from the motherboard and the flip-lock flipped up. Gently detach the touchpad ribbon connected to the motherboard using the blunt forceps. The touchpad ribbon is connected to the motherboard by a connector that flips to tighten and loosen. During reassembly, to reattach the ribbon, the plastic tray will need to be gently removed from the motherboard and the flip-lock flipped up.
  • Gently detach the touchpad ribbon connected to the motherboard using the blunt forceps. The touchpad ribbon is connected to the motherboard by a connector that flips to tighten and loosen. During reassembly, to reattach the ribbon, the plastic tray will need to be gently removed from the motherboard and the flip-lock flipped up.

Con cuidado desengancha la cinta del panel táctil conectada a la placa base usando las pinzas. La cinta del panel táctil está conectada a la placa base con un conector que gira para apretar y aflojar. Durante el rearmado, para enganchar la cinta, la bandeja de plástico necesitará ser removida con cuidado de la placa base y el seguro hacia arriba.

Your contributions are licensed under the open source Creative Commons license.