Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
French

Translating step 5

Step 5
Continue to run the spudger along the crease to release any further clips that may still be attatched. Do no pull off the panel too fast because you don't want to damage the ribbon cable. Slowly pull away the panel.
  • Continue to run the spudger along the crease to release any further clips that may still be attatched.

  • Do no pull off the panel too fast because you don't want to damage the ribbon cable. Slowly pull away the panel.

  • Now that the front panel has been released from its clips you can pull off the front panel.

Continuez à faire passer le spudger le long du pli pour libérer les autres clips qui pourraient encore être attachés.

Ne retirez pas le panneau trop rapidement car vous ne voulez pas endommager le câble ruban. Retirez lentement le panneau.

Maintenant que le panneau avant a été libéré de ses clips, vous pouvez retirer le panneau avant.

Your contributions are licensed under the open source Creative Commons license.