Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Italian

Translating step 1

Step 1
Remove the five long black 55 mm screws labeled C2-5 and C7 with a T9 Torx screwdriver. Carefully flip the device and pull off the body by lifting from the metal section that is attached to the plastic exterior.
  • Remove the five long black 55 mm screws labeled C2-5 and C7 with a T9 Torx screwdriver.

  • Carefully flip the device and pull off the body by lifting from the metal section that is attached to the plastic exterior.

Rimuovi le cinque viti lunghe nere da 55 mm etichettate C2-5 e C7 con un cacciavite T9 Torx.

Facendo attenzione, gira sottosopra il dispositivo e rimuovi la copertura alzando la sezione in metallo che è attaccata alla parte esteriore in plastica.

Your contributions are licensed under the open source Creative Commons license.