Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 1

Step 1
Remove the five long black 55 mm screws labeled C2-5 and C7 with a T9 Torx screwdriver. Carefully flip the device and pull off the body by lifting from the metal section that is attached to the plastic exterior.
  • Remove the five long black 55 mm screws labeled C2-5 and C7 with a T9 Torx screwdriver.

  • Carefully flip the device and pull off the body by lifting from the metal section that is attached to the plastic exterior.

Retirez les cinq longues vis noires de 55 mm marquées C2-5 et C7 avec un tournevis T9 Torx.

Retournez délicatement l'appareil et retirez le corps en le soulevant de la section métallique fixée à l'extérieur en plastique.

Your contributions are licensed under the open source Creative Commons license.