Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

English
French

Translating step 1

Step 1
Unscrew the single captive Phillips #000 screw securing the home button cable. The captive screw is fastened to the home button cable by a spring contact backing. During reassembly, ensure the contact is in the correct orientation—on the side of the screw nearest the LCD.
  • Unscrew the single captive Phillips #000 screw securing the home button cable.

  • The captive screw is fastened to the home button cable by a spring contact backing. During reassembly, ensure the contact is in the correct orientation—on the side of the screw nearest the LCD.

  • If your replacement part does not have this captive screw and spring contact, you will need to transfer them to the new cable.

Dévissez l'unique vis captive Phillips #000 qui fixe le câble du bouton home.

La vis captive est fixée au câble du bouton Home par un contact à ressort à l'arrière. Pendant le remontage, assurez-vous que le contact soit orienté correctement du côté de la vis le plus près du LCD.

Si votre pièce de rechange ne comprend pas cette vis et ce contact, vous devrez les transférer sur le nouveau câble.

Your contributions are licensed under the open source Creative Commons license.