Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

English
Chinese

Translating step 8

Step 8
In this step, you will heat and remove the plastic frame near the digitizer cable. Do not directly heat this ribbon cable, as it is extremely thin and sensitive to heat. Use a heat gun to soften the adhesive next to both sides of the digitizer cable, being careful not to melt the cable.
  • In this step, you will heat and remove the plastic frame near the digitizer cable. Do not directly heat this ribbon cable, as it is extremely thin and sensitive to heat.

  • Use a heat gun to soften the adhesive next to both sides of the digitizer cable, being careful not to melt the cable.

  • Pry the final section of the plastic display frame away from the front glass.

在这个步骤中,你将加热并将塑料支架移到触摸排线的附近。不要直接加热这条排线,因为它非常薄,对热敏感。

用热风枪将触摸排线两侧胶粘剂软化,小心不要熔化排线。

把屏幕支架的最后一部分从前玻璃面板上撬开。

Your contributions are licensed under the open source Creative Commons license.