Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

English
Spanish

Translating step 8

Step 8
In this step, you will heat and remove the plastic frame near the digitizer cable. Do not directly heat this ribbon cable, as it is extremely thin and sensitive to heat. Use a heat gun to soften the adhesive next to both sides of the digitizer cable, being careful not to melt the cable.
  • In this step, you will heat and remove the plastic frame near the digitizer cable. Do not directly heat this ribbon cable, as it is extremely thin and sensitive to heat.

  • Use a heat gun to soften the adhesive next to both sides of the digitizer cable, being careful not to melt the cable.

  • Pry the final section of the plastic display frame away from the front glass.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.