Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Chinese

Translating step 1

Step 1
Detach the motherboard ribbon connecting the two sides of the controller by pulling it straight out with your fingers. Note the orientation of the cable and make sure it faces the right way when you reconnect it. After the two halves are separated, place the top of the controller off to the side.
  • Detach the motherboard ribbon connecting the two sides of the controller by pulling it straight out with your fingers.

  • Note the orientation of the cable and make sure it faces the right way when you reconnect it.

  • After the two halves are separated, place the top of the controller off to the side.

使用手指来断开控制器两侧的主板排线。

注意排线的方向,并且在重新连接的时候确认其方向正确。

断开后,将控制器的顶部放在一边。

Your contributions are licensed under the open source Creative Commons license.