Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Japanese

Translating step 1

Step 1
Detach the motherboard ribbon connecting the two sides of the controller by pulling it straight out with your fingers. Note the orientation of the cable and make sure it faces the right way when you reconnect it. After the two halves are separated, place the top of the controller off to the side.
  • Detach the motherboard ribbon connecting the two sides of the controller by pulling it straight out with your fingers.

  • Note the orientation of the cable and make sure it faces the right way when you reconnect it.

  • After the two halves are separated, place the top of the controller off to the side.

コントローラの2つのパートを接続している、マザーボードのリボンケーブルを、指で引き抜いて取り外します。

接続しなおす際には、ケーブルの向きに注意して、正しい方向を向いていることを確認します。

2つのパートを分離したら、コントローラのトップパートは脇に置きます。

Your contributions are licensed under the open source Creative Commons license.