Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
French

Translating step 1

Step 1
Detach the motherboard ribbon connecting the two sides of the controller by pulling it straight out with your fingers. Note the orientation of the cable and make sure it faces the right way when you reconnect it. After the two halves are separated, place the top of the controller off to the side.
  • Detach the motherboard ribbon connecting the two sides of the controller by pulling it straight out with your fingers.

  • Note the orientation of the cable and make sure it faces the right way when you reconnect it.

  • After the two halves are separated, place the top of the controller off to the side.

Détachez la nappe de la carte mère, qui relie les deux côtés de la manette, en la tirant vers le haut avec vos doigts.

Notez bien l'orientation de la nappe et veillez à la positionner correctement quand vous la reconnecterez.

Une fois les deux moitiés séparées, mettez la partie supérieure de la manette de côté.

Your contributions are licensed under the open source Creative Commons license.