Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
French

Translating step 1

Step 1
Remove the two screws securing the upper component bracket:
  • Remove the two screws securing the upper component bracket:

  • 4.0 mm Phillips #000

  • 2.3 mm Phillips #000

  • It is imperative that the right screws are inserted into their respective holes. Otherwise it may cause severe damage to the LCD during reassembly.

Enlevez les deux vis qui sécurisent le cache des composants supérieurs :

cruciforme #000 de 4,0 mm

cruciforme #000 de 2,3 mm

Il faut impérativement placer correctement les vis dans leurs trous respectifs. Sinon cela pourrait sérieusement endommager le LCD pendant le remontage.

Your contributions are licensed under the open source Creative Commons license.