Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Dutch

Translating step 1

Step 1
Use the tip of a spudger to pry the antenna cable up from its socket on the logic board. To reconnect the cable, use tweezers to position it directly over its socket, then push it straight down with the flat edge of your spudger.
  • Use the tip of a spudger to pry the antenna cable up from its socket on the logic board.

  • To reconnect the cable, use tweezers to position it directly over its socket, then push it straight down with the flat edge of your spudger.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.