Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Italian

Translating step 1

Step 1
Use the tip of a spudger to pry the antenna cable up from its socket on the logic board. To reconnect the cable, use tweezers to position it directly over its socket, then push it straight down with the flat edge of your spudger.
  • Use the tip of a spudger to pry the antenna cable up from its socket on the logic board.

  • To reconnect the cable, use tweezers to position it directly over its socket, then push it straight down with the flat edge of your spudger.

Usa la punta di uno spudger per staccare il cavo dell'antenna dalla sua presa sulla scheda madre.

Per ricollegare il cavo, usa delle pinzette per posizionarlo direttamente sopra la sua presa, quindi premilo sulla presa con la parte piatta del tuo spudger.

Your contributions are licensed under the open source Creative Commons license.