Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Spanish

Translating step 1

Step 1
Use the tip of a spudger to pry the antenna cable up from its socket on the logic board. To reconnect the cable, use tweezers to position it directly over its socket, then push it straight down with the flat edge of your spudger.
  • Use the tip of a spudger to pry the antenna cable up from its socket on the logic board.

  • To reconnect the cable, use tweezers to position it directly over its socket, then push it straight down with the flat edge of your spudger.

Usa la punta de un spudger para levantar el cable de la antena de su zócalo en la placa lógica.

[* black] Use the tip of a spudger to pry the antenna cable up from its socket on the logic board.
+ [* icon_reminder] To [guide|25629|reconnect|stepid=64972|new_window=true] the cable, use tweezers to position it directly over its socket, then push it straight down with the flat edge of your spudger.

Your contributions are licensed under the open source Creative Commons license.