Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
German

Translating step 1

Step 1
Use the tip of a spudger to pry the antenna cable up from its socket on the logic board. To reconnect the cable, use tweezers to position it directly over its socket, then push it straight down with the flat edge of your spudger.
  • Use the tip of a spudger to pry the antenna cable up from its socket on the logic board.

  • To reconnect the cable, use tweezers to position it directly over its socket, then push it straight down with the flat edge of your spudger.

Heble mit der Spitze eines Spudgers das Antennenkabel aus seinem Anschluss auf dem Logic Board.

[* black] Use the tip of a spudger to pry the antenna cable up from its socket on the logic board.
+ [* icon_reminder] To [guide|25629|reconnect|stepid=64972|new_window=true] the cable, use tweezers to position it directly over its socket, then push it straight down with the flat edge of your spudger.

Your contributions are licensed under the open source Creative Commons license.