Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Italian

Translating step 7

Step 7
Apply a few drops of isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone. Carefully wedge a plastic card under the battery on the side nearest the logic board.
Battery removal with latent adhesive
  • Apply a few drops of isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone.

  • Carefully wedge a plastic card under the battery on the side nearest the logic board.

  • Do not pry against the logic board or you may damage the phone.

  • Avoid prying near the top edge of the battery, or you may damage the upper component ribbon cable.

  • Slide the card from the top of the battery to the bottom, pushing toward the edge of the case.

  • If necessary, repeat the same procedure with the case side of the battery.

Applica qualche goccia di alcool isopropilico (>90%) sotto la batteria e lascialo scorrere attorno all'adesivo per ammorbidirlo. L'alcool isopropilico ad alta concentrazione agisce come solvente e asciuga senza lasciare segni, quindi non farà male al tuo iPhone.

Inserisci con cautela una scheda di plastica sotto la batteria dal lato più vicino alla scheda madre.

Non far leva contro la scheda madre, potresti danneggiare il telefono.

Evita di far leva vicino al bordo superiore della batteria, potresti danneggiare il cavo piatto superiore.

Fai scorrere la scheda di plastica dalla parte superiore della batteria verso il basso, premendo verso il bordo del case.

Se necessario, ripeti la stessa procedura dal lato opposto della batteria.

Your contributions are licensed under the open source Creative Commons license.