Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
Italian

Translating step 1

Step 1
Remove the following five screws:
  • Remove the following five screws:

  • One 3 mm Phillips near the screen latch (mind the big magnet on the screen latch).

  • Two 3.5 mm Phillips attaching the EMI fingers to the metal framework.

  • One 10 mm Phillips near the optical drive.

  • One 14 mm long 4 mm standoff in the upper left corner. You can remove this standoff either with a 4 mm nut driver or needlenose pliers.

  • Lift the EMI fingers above the battery connector away from the metal framework.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.