Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Chinese

Translating step 18

Step 18
Below the touch panel are FOUR microphones. Not one, not two… FOUR. Remove the adhesive (sigh) around the microphones with a flat-head screwdriver
Microphones & connectors
  • Below the touch panel are FOUR microphones. Not one, not two… FOUR.

  • Remove the adhesive (sigh) around the microphones with a flat-head screwdriver

  • Solvent may be used if the adhesive is too tough to remove.

  • Next, remove the flex connector through the slot.

  • This is the main flex connector that runs from the bottom to the top panel.

  • This is another light guide for the LED that acts as the AXX 200’s Bluetooth indicator.

  • The actual LED is located on the touch panel PCB.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.