Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Chinese

iPhone 5s 顶部排线更换

Guide Information

= Done = Incomplete
    Use this guide to replace the upper component cable containing the flash, microphone, and sleep/power button cable of an iPhone 5s. [ … ] This guide requires removing the battery. Removing the battery with the adhesive strips is the safest method, but also leaves your battery without adhesive. When replacing your battery, use a piece of double-sided tape to secure it. The battery is pretty tightly secured in the device, but the tape will keep it from rattling. [ … ] '''YouYou can also use this guide to replace the [https://www.ifixit.com/Guide/iPhone+5s+Upper+Component+Cable+Replacement/20280#s57896|logic board antenna bracket] and [https://www.ifixit.com/Guide/iPhone+5s+Upper+Component+Cable+Replacement/20280#s57898|contact clip].''' clip]. [ … ] [video|https://www.youtube.com/watch?v=cJUKOvFQUWU]
    Use this guide to replace the upper component cable containing the flash, microphone, and sleep/power button cable of an iPhone 5s. [ … ] This guide requires removing the battery. Removing the battery with the adhesive strips is the safest method, but also leaves your battery without adhesive. When replacing your battery, use a piece of double-sided tape to secure it. The battery is pretty tightly secured in the device, but the tape will keep it from rattling. [ … ] '''YouYou can also use this guide to replace the [https://www.ifixit.com/Guide/iPhone+5s+Upper+Component+Cable+Replacement/20280#s57896|logic board antenna bracket] and [https://www.ifixit.com/Guide/iPhone+5s+Upper+Component+Cable+Replacement/20280#s57898|contact clip].''' clip]. [ … ] [video|https://www.youtube.com/watch?v=cJUKOvFQUWU]

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief summary will only appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1

      松开把音量键和静音键固定在左侧边框上的螺丝:

      Step 2

      用撬棒把静音键从左侧边框拨出。

      Step 3

      用撬棒把左侧边框上的音量键拨出。

      Step 4

      用镊子取出把后置摄像头固定在后盖的胶片垫。

      Step 5

      松开把逻辑主板天线支架固定在后盖上的1.3mm飞利浦#000号螺丝。

      Step 6

      取出逻辑主板上的天线支架。

      Step 7

      松开固定链接片和电源键支架的2.1mm飞利浦#000号螺丝。

      Step 8

      从机身中取出链接片。

      Step 9

      将平口撬棒插入顶部排线下方滑动使其与后盖分离。

      Step 10

      滑动平口撬棒在靠近音量键的排线下方。

      Step 11

      用撬棒的尖头挑起前置排线与振子接触点固定在后盖上的胶贴。

      Step 12

      用撬棒的尖头把扬声器排线从后盖上分离出来。

      Step 13

      用镊子从后盖上取出电源键固定支架。

      Step 14

      用撬棒尖头把电源键向机身内侧拨动。

      Step 15

      取出把电源键固定机身中的卡扣。

      Step 16

      从机身中取出顶部排线。

      Your contributions are licensed under the open source Creative Commons license.