Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Chinese

Translating step 11

Step 11
Use the tip of a spudger to free the adhesive securing the vibrator contact portion of the upper assembly cable from the rear case. If the flash assembly has not already popped out of its hole in the rear case, use the tip of a spudger to push it free. If the flash assembly has not already popped out of its hole in the rear case, use the tip of a spudger to push it free.
  • Use the tip of a spudger to free the adhesive securing the vibrator contact portion of the upper assembly cable from the rear case.

  • If the flash assembly has not already popped out of its hole in the rear case, use the tip of a spudger to push it free.

用撬棒的尖头挑起前置排线与振子接触点固定在后盖上的胶贴。

如果闪光灯没有从后盖的固定孔中分离出来,可以使用撬棒的尖头把其剥离出来。

Your contributions are licensed under the open source Creative Commons license.