Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 11

Step 11
Use the tip of a spudger to free the adhesive securing the vibrator contact portion of the upper assembly cable from the rear case. If the flash assembly has not already popped out of its hole in the rear case, use the tip of a spudger to push it free. If the flash assembly has not already popped out of its hole in the rear case, use the tip of a spudger to push it free.
  • Use the tip of a spudger to free the adhesive securing the vibrator contact portion of the upper assembly cable from the rear case.

  • If the flash assembly has not already popped out of its hole in the rear case, use the tip of a spudger to push it free.

Utilisez la pointe d'un spudger pour décoller de la coque arrière l'adhésif fixant la partie contact du vibreur de la nappe supérieure.

Si l'ensemble du flash n'a pas encore été sorti de son emplacement dans la coque arrière, utilisez la pointe d'un spudger pour l'en sortir.

Your contributions are licensed under the open source Creative Commons license.