Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

English
German

Translating step 8

Step 8
Remove the following six screws securing the logic board to the outer case:
  • Remove the following six screws securing the logic board to the outer case:

  • Three 25 mm T10 Torx

  • Two 21.5 mm T10 Torx

  • One 7 mm T10 Torx

Das Logic Board ist mit sechs Torx T10 Schrauben am äußeren Gehäuse befestigt. Drehe sie heraus:

Drei 25 mm Schrauben

Zwei 21,5 mm Schrauben

Eine 7 mm Schraube

Your contributions are licensed under the open source Creative Commons license.