Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 32 guides that include this step.

English
Italian

Translating step 8

Step 8
Do not try to completely remove the front panel assembly from the rear case, as there are several delicate ribbon cables connecting them. Pull the plastic nub to release the vacuum seal on the suction cup.
  • Do not try to completely remove the front panel assembly from the rear case, as there are several delicate ribbon cables connecting them.

  • Pull the plastic nub to release the vacuum seal on the suction cup.

  • Remove the suction cup from the screen.

Non provare a rimuovere completamente il pannello dal case posteriore poiché ci sono ancora alcuni cavi a nastro tra le due parti.

Tira la linguetta di plastica per staccare la ventosa.

Rimuovi la ventosa dallo schermo.

[* icon_caution] Do not try to completely remove the front panel assembly from the rear case, as there are several delicate ribbon cables connecting them.
[* black] Pull the plastic nub to release the vacuum seal on the suction cup.
[* black] Remove the suction cup from the display assemblyscreen.
[* black] Remove the suction cup from the display assemblyscreen.

Your contributions are licensed under the open source Creative Commons license.