Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 32 guides that include this step.

English
French

Translating step 8

Step 8
Do not try to completely remove the front panel assembly from the rear case, as there are several delicate ribbon cables connecting them. Pull the plastic nub to release the vacuum seal on the suction cup.
  • Do not try to completely remove the front panel assembly from the rear case, as there are several delicate ribbon cables connecting them.

  • Pull the plastic nub to release the vacuum seal on the suction cup.

  • Remove the suction cup from the screen.

N'essayez pas de retirer complètement l'écran du boîtier arrière car plusieurs câbles plats délicats les relient encore.

Tirez sur la petite bosse en plastique pour libérer l'air dans la ventouse.

Enlevez la ventouse de l'écran.

[* icon_caution] Do not try to completely remove the front panel assembly from the rear case, as there are several delicate ribbon cables connecting them.
[* black] Pull the plastic nub to release the vacuum seal on the suction cup.
[* black] Remove the suction cup from the display assemblyscreen.
[* black] Remove the suction cup from the display assemblyscreen.

Your contributions are licensed under the open source Creative Commons license.