Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 32 guides that include this step.

English
Chinese

Translating step 11

Step 11
Use the flat end of a spudger to snap the front portion of the Touch ID cable bracket down over the cable connector. If the bracket does not snap down flush, you may need to remove the bracket and slide it over the cable connector again for a better fit.
  • Use the flat end of a spudger to snap the front portion of the Touch ID cable bracket down over the cable connector.

  • If the bracket does not snap down flush, you may need to remove the bracket and slide it over the cable connector again for a better fit.

使用撬棒平头的一边把 Touch ID 电线支架给撬出来。

如果支架没有很容易出来,你可能需要移除支架,并再次把支架滑过电线接口。

Your contributions are licensed under the open source Creative Commons license.