Describe the specific part or component of this device you're working on. Ex: Battery
Create a title.
Communicate background information before the reader dives into the guide.
Step 1
Pictures of the device and the type plate
Step 2 — Opening the housing
Remove the marked Phillips screws - PH0 or PH1. Due to the hole depth and diameter, you cannot reach the screw head with the iFixit bit sets. A screwdriver with a longer shaft length is required, see middle image.
Step 3 — Loosening the ribbon connectors
The cover can be opened by gently pulling on the antenna, see first picture.
Step 4 — Further disassembly
Removing the battery holder - PH0 or PH1 - and the ribbon connector
Step 5 — Overview of modules
Rechargeable battery: 5000 mAh 7.4 V 37 Wh
Your contributions are licensed under the open source Creative Commons license.